Pacific Environmental Technologies’ Modular Clean Isolator Systemä is designed to meet the ever-changing needs of our customers, from easy cleanroom expansions to classification upgrades.  Each Modular Clean Isolator Systemä is built to meet a specific application (cleanroom or non-cleanroom) and ISO cleanliness levels from ISO 4 through ISO 8 (Class 10 to Class 100,000).  Additionally, they can be designed for use as a negative pressure room for containment purposes.  Whatever the requirement, the Modular Clean Isolator Systemä and its many standard and optional features is sure to accommodate it.

The Modular Clean Isolator Systemä has a structural frame that is designed to California’s “Seismic Zone 4” requirements and to free span up to 24 feet.  In addition, the Modular Clean Isolator Systemä can carrying a ceiling load of 10 lbs per square on cleanrooms spanning up to 20’, utilizing its standard interior frame joist and optional heavy-duty 1 ½” ceiling grid.  

Standard modular wall panels are ¼” thick and features a white non-conductive smooth aluminum skin on both sides.  These modular wall panels are secured to a 2” aluminum framing system, which ties the entire structure together.  Low wall air grilles can be installed for either positive or negative pressure applications.  The entire structural platform and 2” aluminum framing system used on each Modular Clean Isolator Systemä, features a durable, non-contaminating glossy white powder coated finish. 

An optional feature that makes installation of the electrical components quick and easy is the user-friendly, pre-wiring system.  This optional pre-wiring system, consist of pre-fabricated armored cable with modular plugs, which allow daisy chain electrical connection to the cleanroom light fixtures and motorized HEPA and/or ULPA filter modules.  The cleanroom light fixtures and HEPA and/or ULPA filter modules are then connected to pre-wired junction boxes, part of the optional pre-wiring system.

Each Modular Clean Isolator Systemä is pre-fabricated, labeled and packaged for fast and easy on-site installation.  Once the installation is complete, the visual appearance and high tech look of these cleanroom systems are sure to show case any application.  

STANDARD FEATURES

·         Heavy duty leveling glides

·         4” square main support posts

·         Vinyl faced cleanroom ceiling tiles

·         Heavy-duty 1” white aluminum T-bar ceiling grid

·         Low wall air grilles for positive or negative pressure rooms

·         On/off switch for lights (flush mounted in a 4” main support post)

·         3⁰6⁸ single swing door with vision light and standard door hardware

·         Heavy-duty 1 ½” aluminum T-bar ceiling grid painted to match the structural frame

·         Sealed 2’ x 4’ lay-in light fixtures with electronic ballast and (4) T-8 lamps, 115V 1f

·         Motorized (low noise type) 2’ x 4’ HEPA or ULPA filter modules with pre-filter, 115V 1f

·         White non-conductive aluminum skinned wall panels (¼” thick) and 2” square aluminum framing system

OPTIONAL FEATURES

 

·         Tear drop lighting

·         Mylar ceiling tiles

·         Pre-wiring with MC cable

·         Fire suppression system(s)

·         Various door types and sizes

·         Ionization systems for ESD control

·         Tempered or wire glass viewing window(s)

·         Pre-wiring with armored cable and modular plugs

·         Electrical outlets & power drops (various voltages)

·         Negative pressure design for containment purposes

·         Heavy-duty 1 ½” white aluminum T-bar ceiling grid

·         Internal or external gownroom and de-gowning areas

·         Negative pressure plenum with remote access pre-filters

·         Pressure differential gauge for HEPA/ULPA filter loading

·         277V light fixtures and motorized HEPA/ULPA filter modules

·         Pass-thru chamber(s) with mechanical interlocking clear PVC doors

·         Remote on/off switch or variable speed control of HEPA/ULPA filter modules

·         Application required utilities such as N2, CDA, compressed air, low vacuum, etc.

·         Air conditioning and heating systems, including precise temperature and humidity control

·         Pressure monitoring panel for HEPA/ULPA filter loading and room(s) pressure differential

·         Remote access pre-filters (replaces motorized HEPA/ULPA filter module top mounted pre-filter)

·         Wall Panels: Static dissipative white aluminum facing or stainless steel facing on both sides of aluminum honeycomb or plastic fluted core.  MDF with melamine facing on both sides and non-conductive or static dissipative PVC, acrylic, or polycarbonate

·         Installation, commissioning and cleanroom certification